Leon Mk2
| Clutch hydraulic system: assembly overview |
| 1 - | Brake fluid reservoir |
| 2 - | Clip |
| 3 - | Circulation hose |
| 4 - | Clutch master cylinder |
| q | removing and fitting → Chapter |
| 5 - | Mounting |
| q | Replace only with the clutch master cylinder removed |
| q | Remove → Fig., |
| q | fitting → Fig. |
| 6 - | Clutch pedal |
| q | removing and fitting → Chapter |
| 7 - | Nut |
| q | 25 Nm |
| q | Self-locking |
| q | Always replace. |
| 8 - | O-ring |
| q | Install on line connection → Fig. |
| q | Fit with brake fluid |
| 9 - | Pipe and hose assembly |
| q | Allocation: → Parts catalogue |
| 10 - | Support |
| q | Fixed onto the bodywork |
| 11 - | Support |
| q | Secured to the gearbox |
| 12 - | Bolt |
| q | 20 Nm |
| 13 - | Protective cap |
| 14 - | Air bleeding valve |
| q | Bleed air from hydraulic clutch system → Chapter |
| 15 - | Clutch cylinder: |
| q | removing and fitting → Chapter |
| q | After installation, the gear change mechanism must be adjusted → Chapter |
| 16 - | Gearbox: |
| 17 - | Clip |
| q | Remove levering with a screwdriver |
| q | Extract as far as possible if the tubes are removed |
|
|
|
|
|
|
| Item | Connection type |
| -1- | Connection with groove -arrow 1- |
| -2- | Connection with recess -arrow 2- |