Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk201 · Power transmission
01 · Transmission

Clutch: Assembly overview

Make
SEAT
Model
Leon Mk2
Section
Clutch, control › Coupling unit › Clutch: Assembly overview
Power transmissionClutch: Assembly overview
Clutch: Assembly overview
Allocate clutch according to → Electronic parts catalogue „ETKA“.
   
Diagram not available
1 - Flywheel
q   Removing and fitting → Rep. gr.13
q   Ensure that centring pins are correctly seated
q   The clutch lining contact surface must be free of grooves, oil and grease
2 - Clutch plate
q   Removing and installing → Chapter>>>>>>>>
q   Renew only together with SAC pressure plate.
q   Installation position: → Fig.
q   Diameter of the clutch plate, according to → Spare parts catalogue
3 - SAC pressure plate
q   Removing and installing → Chapter>>>>>>>>
q   SAC means „self-adjusting clutch“
q   Renew only together with clutch plate.
q   Checking ends of diaphragm spring → Fig.
q   Checking spring connection and rivets → Fig.
q   Checking position of adjusting mechanism with new pressure plates only → Fig.
4 - Bolt, 20 Nm
q   Slacken and tighten diagonally in stages

   

The same page in: Leon Mk1.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.