6.INSTALL EXHAUST VALVE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 6.INSTALL EXHAUST VALVE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSTALL EXHAUST VALVE

*a 30 mm (1.18 in.) or more
Apply plenty of engine oil to the tip area of the intake valve shown in the illustration.
b. Install the intake valve, valve compression spring and valve spring retainer to the cylinder head sub- assembly.
NOTICE: Install the same parts in the same combination to their original locations.
c.

Using SST and wooden blocks, compress the valve compression spring and install the valve spring retainer locks to the valve spring retainer. SST 09202-70020 09202-00021
d. Using a plastic-faced hammer, lightly tap the intake valve stem tip to ensure a proper fit.
NOTICE: Be careful not to damage the valve spring retainer.
13715
6.INSTALL EXHAUST VALVE
a.

*a 30 mm (1.18 in.) or more
Apply plenty of engine oil to the tip area of the exhaust valve shown in the illustration.
b. Install the exhaust valve, valve compression spring and valve spring retainer to the cylinder head sub- assembly.
NOTICE: Install the same parts in the same combination to their original locations.
Parts & tools for this job For Toyota Hilux
- PARTExhaust gasketSearch: Toyota Hilux exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.