7.INSTALL VALVE STEM CAP - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 7.INSTALL VALVE STEM CAP - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
7.INSTALL VALVE STEM CAP
c.

Using SST and wooden blocks, compress the valve compression spring and install the valve spring retainer locks to the valve spring retainer. SST 09202-70020 09202-00021
d. Using a plastic-faced hammer, lightly tap the exhaust valve stem tip to ensure a proper fit.
NOTICE: Be careful not to damage the valve spring retainer.
13716
7.INSTALL VALVE STEM CAP
a. Apply a light coat of engine oil to the valve stem caps.
b. Install the 16 valve stem caps to the cylinder head sub-assembly.
NOTICE:
· Install the valve stem cap at the same place it was removed from.
· Do not drop the valve stem caps into the cylinder head sub-assembly.
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.