/ ACTIVE TEST - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REGISTRATION › / ACTIVE TEST - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
/ ACTIVE TEST

g.

*a Example
Confirm that the atmospheric pressure screen is displayed.
i. Confirm the displayed atmospheric pressure. Standard: Atmosphere Pressure is 85 kPa or higher
NOTICE:
· If the atmospheric pressure is below the standard range, "Pilot Quantity Learning(Detail)" cannot be performed. In this case, press "Exit" and clear the learned values using "Pilot Quantity Learning Value Clear".
· If the atmospheric pressure is below the standard range, even if "Pilot Quantity Learning(Detail)" is performed, learning will not be completed.
ii. If the atmospheric pressure is within the standard range, proceed to the next screen.
h. Confirm the condition of the engine and wait until learning can be performed. Essential Conditions for Learning
| GTS Display | Standard |
|---|---|
| Coolant Temp | 70 to 100°C |
| Intake Air | -25 to 120°C |
| Battery Voltage | 10 V or higher |
| Pilot Quantity State(CAT) | READY |
| Atmosphere Pressure | 70 kPa or higher |
HINT:
· If the values deviate from the standard above, "Pilot Quantity Learning(Detail)" enters a standby state or is canceled.
· When the display indicates that "Pilot Quantity State(CAT)" is NG, perform "Pilot Quantity Learning(Detail)" after performing the "Activate the DPF Rejuvenate (PM)" Active Test using the GTS.
/ ACTIVE TEST
· When the essential conditions to perform learning are met, the screen will change automatically.
NOTICE:
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.