2.INSPECT 5TH GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 2.INSPECT 5TH GEAR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
2.INSPECT 5TH GEAR

33336
2.INSPECT 5TH GEAR
a.

Using a cylinder gauge, measure the inside diameter of the 5th gear. Standard inside diameter:
53.013 to 53.029 mm (2.0872 to 2.0877 in.) Maximum inside diameter:
53.029 mm (2.0877 in.) If the inside diameter is more than the maximum, replace the 5th gear.
33337
3.INSPECT 6TH GEAR SUB-ASSEMBLY
a.

Using a cylinder gauge, measure the inside diameter of the 6th gear sub-assembly. Standard inside diameter:
51.015 to 51.040 mm (2.0085 to 2.0094 in.) Maximum inside diameter:
51.040 mm (2.0094 in.) If the inside diameter is more than the maximum, replace the 6th gear sub-assembly.
33333
4.INSPECT 3RD GEAR
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.