Engine and Engine AggregatesOil Circuit
Oil Circuit
|
Engine |
|
17 DT, X 17 DT (TC 4 EE 1) |
|
Engine oil quality up to MY '96 |
|
|
|
|
Single and multi-grade oils |
|
API SF/CD, API SG/CD, API CD, CCMC-PD2 |
|
|
Easy-running oils |
|
API SF/CD, API SG/CD, CCMC-G5/PD2 |
|
Engine oil quality as of MY '96 |
|
|
|
|
Easy-running oils |
|
CCMC-G5/PD2 |
|
Engine oil capacities up to MY '96 |
|
|
|
|
Initial filling |
l |
4.85 |
|
|
Filling quantity with filter change |
l |
4.50 |
|
|
Mark MIN to MAX |
l |
1.00 |
|
Engine oil capacities as of MY '96 |
|
|
|
|
Initial filling |
l |
5.25 |
|
|
Filling quantity with filter change |
l |
5.00 |
|
|
Mark MIN to MAX |
l |
1.00 |
|
Engine oil disposal |
|
When disposing of used oil, observe the relevant local regulations. |
|
Oil cooler thermostat |
|
|
|
|
Opening temperature |
° C |
107 |
|
|
Fully open |
° C |
120 |
Oil Circuit (continued)
|
Engine |
|
17 DT, X 17 DT (TC 4 EE 1) |
|
Oil pump |
|
|
|
|
Oil pressure at idle speed 830 rpm and engine at operating temperature (oil temperature ≥ 80 ° C) |
kPa (bar) |
min. 390 (3.9) |
|
Clearance of pump shaft in cylinder block |
|
|
|
|
New pump shaft |
mm |
0.040 to 0.125 |
|
|
Run-in pump shaft |
mm |
max. 0.200 |
|
Axial play between oil pump cover and rotors, |
|
|
|
|
New rotors |
mm |
0.035 to 0.100 |
|
|
Run-in rotors |
mm |
max. 0.150 |
|
Play between outer rotor and cylinder block, |
|
|
|
|
New rotors |
mm |
0.240 to 0.360 |
|
|
Run-in rotors |
mm |
max. 0.400 |
|
Mesh play between rotors, |
|
|
|
|
New rotors |
mm |
0.130 to 0.150 |
|
|
Run-in rotors |
mm |
max. 0.200 |
|
|
09 Engine
