Intake Line, Replace (Pressure Lines)

Intake Line, Replace  

Notice: 

This operation is described for an LHD vehicle with X 14 XE engine; for other versions, proceed analogously. Fluid leaks during removal of lines and hoses - place collecting basin underneath. Take care to ensure snag- and kink-free routing of hydraulic hoses and lines during installation; avoid chafing or contact with hot or rotating parts.  

  Remove, Disconnect   

Detach intake line from hydraulic pump and fluid reservoir. Detach and remove intake line (arrow) from fastening elements.     Install, Connect    Suction intake hose into fastening elements and install on hydraulic pump and fluid reservoir with hose clamp - fasten fluid-tight.   Charge and bleed hydraulic system - see operation "Hydraulic System, Charge and Bleed".