Replace side airbag (not deployed) (front
seat)
Remove
2. |
Wait 1 minute for airbag to deactivate
|
3. |
Detach front seat belt securing panel (1)
|
4. |
Detach seat belt from front seat
|
|
|
5. |
Place seat in the most forward position
|
6. |
Detach driver's seat, rear
|
7. |
Remove front seat
Note: Disconnect wiring
harness plug.
• |
Remove from the front guide
|
|
|
|
8. |
Partly detach front seat backrest panelling
• |
Detach panelling all round (I)
|
|
|
|
10. |
Remove side airbag
• |
Release and disconnect wiring harness plug
|
|
|
|
Install
11. |
Insert side airbag
• |
Connect and latch wiring harness plug
Note: Ensure correct
wiring harness routing
|
|
13. |
Fasten front seat backrest panelling
• |
Fasten panelling all round
|
|
14. |
Install front seat
Note: Connect wiring
harness plug
• |
Insert into front guide
|
|
15. |
Attach front seat, rear
|
16. |
Return seat to its original position
|
17. |
Attach seat belt at front seat
|
18. |
Attach seat belt fastening panel
|
20. |
Program volatile memories
|
|