vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Replace trailer hitch - L35 > < C-029 Front Passenger Seat Belt Buckle Sensor Circuit

Replace trailer hitch - L48/L70

  Remove

1.   Detach rear panelling
2.   Hang off exhaust end box
•   Hang off 2x rubber brackets
3.   Detach trailer hitch socket
•   Fold down trailer hitch socket
•   Unscrew 3x bolt
•   Unclip and remove trailer hitch socket housing
Object Number: 7361541  Size: DEFAULT


4.   Detach trailer hitch
•   Unscrew 2x nuts left (1) (Il)
•   Unscrew 2x nuts (2) right (I)
•   Remove trailer hitch
Object Number: 7361614  Size: DEFAULT


5.   Remove load compartment mat
6.   Detach lower tailgate panel
•   Unclip 8x clip
Object Number: 3446756  Size: DEFAULT


7.   Remove trailer hitch retaining plate
•   Unscrew 2x bolt
•   Remove 2x retaining plates

  Install

8.   Install trailer hitch retaining plate
•   Insert 2x retaining plates
•   Tighten 2x bolts 1.5 Nm
9.   Install lower tailgate panel
•   Clip in 8x clips
10.   Install load compartment mat
11.   Install trailer hitch
•   Insert trailer hitch
Note:   Use new nuts and bolts with bolt retainer compound!
•   Tighten 4x nuts 45 Nm
12.   Install trailer hitch socket
•   Attach cable ties
•   Attach wiring harness bracket
•   Tighten 3x bolt
13.   Hang up exhaust end box
•   Hang up 2x rubber brackets
14.   Attach rear panelling

Replace trailer hitch - L35 > < C-029 Front Passenger Seat Belt Buckle Sensor Circuit