vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Component Locator > < Technical Data: Sealants, Lubricants and Locking Compounds - Steering

Torque Guide Values – Steering

Note:   Bolts which are fitted using the torque and angle method (beyond the elastic limit) must not be re-used in Service after they have been released.

 

Nm

Supply and return line to electro-hydraulic supply unit ZF

16

Supply line to electro-hydraulic supply unit (TRW)

30

Supply and return line to steering gear ZF

16

Supply line to steering gear (TRW)

30

Damping bush to bracket and electro-hydraulic supply unit (TRW)

7

Electro-hydraulic supply unit bracket to steering gear

22

Electro-hydraulic supply unit bracket to front axle body

22

Engine damping block bracket to rear of transmission

80

Engine damping block bracket to rear of engine damping block

55

Shift guide bracket to front axle body

20

Heat shield to steering gear

4

Clamp bolt for steering column assembly

22

Tie rod to tie rod end lock nut

60

Steering gear to front axle body

45 Nm + 45° + 15° 1)

Steering/ignition lock member to steering column

15

Steering wheel to steering shaft

30 3)  

Steering column assembly to crossmember

22

Return line to steering gear (TRW)

30

Tie rod to steering gear rack

90 2)

Tie rod end to steering knuckle

30 Nm + 90° + 15° 1)  

Intermediate shaft to steering gear shaft

24 3)

Intermediate shaft to steering shaft

24 3)  



1 ) Use new nuts and bolts
2 ) Clean thread on rack and coat with locking compound
3 ) Clean thread and insert bolt with locking compound

Component Locator > < Technical Data: Sealants, Lubricants and Locking Compounds - Steering