Workshop Manuals Factory service & repair Vauxhall
Vauxhall Astra J15 · Safety and Security
15 · General

Security Indicator Inoperative

Make
Vauxhall
Model
Astra J
Section
Immobilizer › Other Information › Security Indicator Inoperative
Safety and SecuritySecurity Indicator Inoperative

Security Indicator Inoperative

Diagnostic Instructions

    •  Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
    •  Review Strategy Based Diagnosis for an overview of the diagnostic approach.
    •  Diagnostic Procedure Instructions provides an overview of each diagnostic category.

Circuit/System Description

The main immobiliser function is performed as an interaction between several modules. The process that determines whether the engine may be engaged or not consists of several steps. When the immobilizer is active the indicator in the dashboard is flashing.

Reference Information

Schematic Reference

Immobiliser Schematics

Connector End View Reference

Component Connector End Views

Description and Operation

Immobiliser Description and Operation

Electrical Information Reference

    •  Circuit Testing
    •  Connector Repairs
    •  Wiring Repairs


Scan Tool Reference

Control Module References for scan tool information

Circuit/System Testing

Ignition ON, perform the Instrument Cluster All Indicators test with the scan tool. Verify that the security indicator turns on and off.

⇒ If the indicator always stays on or off, replace the P16 Instrument Cluster.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for instrument cluster replacement, setup, and programming

Parts & tools for this job For Vauxhall Astra

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.