The power steering control module continuously monitors the
digital torque sensor's torque and index current signals. As the
steering wheel is turned and torsional twist is applied to the
steering shaft, the steering input and output shafts are monitored
via the torque signal circuit and then processed by the power
steering control module to calculate the steering torque.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The power steering control module detects a short to ground,
short to voltage, or an open/high resistance on any of the torque
sensor circuits.
Action Taken When the DTC Sets
•
DTC C0545 is stored in
memory.
•
The driver information center
displays the SERVICE POWER STEERING warning message.
•
No steering assist.
Conditions for Clearing the DTC
•
A current DTC will clear on
the next malfunction-free ignition cycle.
•
A history DTC will clear after
40 consecutive malfunction-free ignition cycles.
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
Help keep workshop manuals free
workshop-manuals.com provides free online workshop manuals.
If they helped you fix your car, please consider sharing or
making a small donation to keep the servers running.