DTC C0569 3A: System Configuration
Incorrect Component Installed
Circuit/System Description
The power steering control module continuously monitors the
thermal cycle counter of the steering gear. If the power steering
control module is replaced, the thermal cycle counter value needs
to be transferred from the existing power steering control module
over to the new power steering control module using the SPS
Electric Power Steering Setup Procedure.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The thermal cycle counter value does not meet the system
requirement.
Action Taken When the DTC Sets
•
DTC C0569 is stored in
memory.
•
The driver information center
displays the SERVICE POWER STEERING warning message.
•
No Steering assist.
Conditions for Clearing the DTC
•
A current DTC will clear on
the next malfunction free ignition cycle.
•
A history DTC will clear after
40 consecutive malfunction free ignition cycles.
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
Help keep workshop manuals free
workshop-manuals.com provides free online workshop manuals.
If they helped you fix your car, please consider sharing or
making a small donation to keep the servers running.