Symptoms - Automatic Transmission
Note: Use the symptom
tables only if the following conditions are met:
• |
The control
modules can communicate via the serial data link. |
Visual/Physical Inspection
Inspect the easily accessible or visible system components for
obvious damage or conditions which could cause the symptom.
Intermittent
Faulty electrical connections or wiring may be the cause of
intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections .
Symptom List
Refer to a symptom diagnostic procedure from the following list
in order to diagnose the symptom:
• |
Noise and Vibration
Diagnosis |
• |
Symptom Not Found or No
Symptom Detected |
|