- Corsa C Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Special Tools and Equipment
- Diagnostic Information and Procedures
- Other Information
- Technical Service Bulletins
- Inspections
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Fuel Injection Systems
- Description and Operation
- Multec S
- Motronic M/ME 1.5.5
- Simtec 71
- EDC-ECD V5
- Repair Instructions
- Specifications
- Technical Service Bulletins
- Poor Operation, Incorrect Operation
- No Start
- Poor Start
- Engine Y17DT/L - Start problems during wiper motor is on, TC P0370(4) set
- Schematic and Routing Diagrams
- Fuel Injection Nozzles
- Fuel Injection Lines
- Crankshaft Pulse Pickup
- Accelerator Pedal Position Sensor
- Injection Pump
- Hot Film Mass Air Flow Meter
- Engine control unit
- Charge Pressure Sensor
- Coolant Temperature Sensor
- Charge Pressure Regulation Solenoid Valve
- Fuel injection pump control unit
- HDRC TX2
- Multijet 6JF
- Denso DEC
- Electronic Diesel Control EDC 16 C3, EDC 16 CP33, EDC 16 C36, EDC 17 C11
- Motronic ME 7.6.1/ME 7.6.2/ME 7.6.3/ME 7.6.4/ME 7.9.9
- Multijet 6JO
- Engine Electrics
- Cooling System
- Turbo-Charging
- DOHC diesel engine
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories