Slide Block Guide, Replace

Slide Block Guide, Replace

Remove

Remove operating unit - see operation "Operating Unit, Replace".

Remove water deflector panel (gutter) - see operation "Water Deflector Panel (Gutter), Replace".

Unscrew crank drive from operating unit.

Pull plug from end of roof guide.

Pull guide part assembly from continuous roof guide and remove slide block guide.

Detach connecting rod from water deflector panel (gutter) guide. Remove retaining ring from bolt and detach slide block guide from cable guide and front guide.

Illustration shows installation points:

25      Front guide               b     Retaining ring

                                           c     Washer

                                           d     Bolt

29      Cable guide              e     Retaining ring

                                           f      Bolt

30      Water deflector

          panel guide              g     Connecting rod

Install

Insert slide block guide in guide parts assembly.

Insert slide block in lower groove of roof guide.

Push guide parts assembly into roof guide until lever catches in roof guide recess.

Push cable guide in until centre of guide bolt aligns with adjustment notch.

1     Lever

2     Guide bolt

3     Adjustment notch

Place plug on end of roof guide.

Adjust crank drive - see operation "Crank Drive, Adjust" - and install.

Install water deflector panel (gutter) - see operation "Water Deflector Panel (Gutter), Replace".

Install operating unit - see operation "Operating Unit, Replace".