- Omega B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Labour Time Allowances
- Diagnostic Information and Procedures
- Other Information
- Technical Service Bulletins
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Diesel Engine
- Fuel Injection Systems
- Repair Instructions
- Specifications
- Diagnostic Information and Procedures
- Simtec 56/56.1
- DDE 2.1
- Motronic M 1.5.4
- Repair Instructions
- Motronic Switch, Remove and Install; Pressure Switch - Fan, Remove and Install - X 20 DTH Engine
- Illustrations - Engine Compartment Survey Motronic M1.5.4)
- Illustration - Wiring Harness Routing in Engine Compartment (Schematic)
- DIS Ignition Module, Remove and Install
- Fuel Pressure, Check
- Checking and adjusting values - 20 SE, X 20 SE
- Torque guideline values - 20 SE, X 20 SE (OHC Engine)
- Main information - 20 SE, X 20 SE
- Engine management - 20 SE, X 20 SE
- Description and Operation
- Component Locator
- Specifications
- Diagnostic Information and Procedures
- Other Information
- Schematic and Routing Diagrams
- CO-Potentiometer
- Throttle Valve Housing
- Throttle Valve Potentiometer
- Pressure Regulator
- Injection Valve
- High Voltage Distributor
- Inductive Impulse Sensor
- Knocking Sensor
- Fuel Pump
- Fuel Pump Relay
- Oxygen Sensor
- Idle Speed Adjuster
- Air Flow Meter
- Control Unit
- Tank Ventilation Valve
- Coolant Temperature Sensor
- Ignition Coil
- Wiring Harness
- Air Filter Housing
- Motronic M 2.8.1
- Engine Electrics
- Cooling System
- Turbo-Charging
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories