Crank Drive, Adjust (Sliding Roof)

Make

Vauxhall

Model

Vectra B

Section

Sliding Roof › Repair Instructions › Crank Drive, Adjust

Body EquipmentCrank Drive, Adjust

Crank Drive, Adjust     Adjust    Place crank on removed drive (the pin points in direction of travel). Turn crank clockwise until stop. Turn crank three full turns back to the catch position.   Notice:  If the crank handle cannot be fully turned, the crank drive must be replaced.     1  Pinion - straight teeth (crank)   2  Pin (points towards front)   3  Pinion - slanted teeth (actuation cables)   4  Crank drive       Important!    With manual drive, the crank stops at "open" after 8 turns. The shell attains its end position when the button is pressed and the crank turned another 2 turns.

04 Body & interior