Servicing Girling front brake caliper

Notes:

• ◆ When carrying out repairs install all parts supplied in repair kit.
• ◆ Apply thin coat of brake fluid to brake cylinder, piston and seal.

• Protective seal
• Bleed valve
• ◆ Apply thin coat of brake cylinder paste to threads before screwing in
• Brake caliper housing
• Self-locking bolts, 35 Nm
• ◆ Renew
• ◆ When loosening and tightening counter-hold on guide pin

• Seal
• ◆ Removing and installing
  
• Piston
• ◆ Removing and installing
  => Page 47-23
• ◆ Apply thin coat of brake fluid to piston before inserting
• Protective seal
• ◆ Do not damage when inserting piston
• Brake carrier with guide pins and protective caps
• ◆ Supplied as replacement part assembled with sufficient grease on guide pins
• ◆ If protective caps or guide pins are damaged use repair kit. Use grease sachet supplied to lubricate guide pins