Privacy Policy
Donate and help keep workshop manuals freely available.
Other Volkswagen Workshop Service and Repair Manuals
Other Makes
Running gear
Body
Engine, mechanics
Vehicle electrics
Power transmission
Heating, ventilation, air conditioning
Power unit
Simos injection and ignition system
Motronic injection and ignition system
4-Cyl. injection engine (2 valve, roller rocker finger), Mechanics
Mono Motronic injection and ignition system
Diesel injection and glow plug system
4-cyl. diesel engine, Mechanics
1AV fuel injection and ignition system (2-valve)
1AV fuel injection and ignition system (4-valve)
4CV fuel injection and ignition system
4AV injection and ignition system
Motronic inj. and ignition system (2-valve, roller rocker finger)
4LV injection and ignition system
4-Cyl. injection engine (4 valve), Mechanics
4-Cyl. injection engine (4-valve, roller rocker arm), Mechanics
4-Cyl. injection engine (4 valve, roller rocker finger), Mechanics
4-cyl. injection engine (4-valve, roller rocker finger), Mechanics
3-cylinder diesel engine
Direct injection and glow plug system with distributor pump as of 10.99
Self diagnosis, V.A.G Inspection Service
Self-diagnosis
Fault table
Final control diagnosis
Measured value blocks
Safety precautions
Read measured value block
Evaluating measured value blocks
Display group 000 at idling speed (engine warm, coolant temperature not below 80°C)
Display group 001 at idling speed (engine warm, coolant temperature not below 80°C)
Evaluation: Display group 1, display zone 2 - quantity injected
Evaluation: Display group 1, display zone 3 - voltage of modulating piston movement sender
Display group 002 at idling speed (engine warm, coolant temperature not below 80 °C)
Evaluation: Display group 2, display zone 2 - accelerator position
Evaluation: Display group 2, display zone 3 - operating condition
Display group 003 at idling speed (engine warm, coolant temperature not below 80 °C)
Display group 004 at idling speed (engine warm, coolant temperature not below 80 °C)
Evaluation: Display group 4, display zone 2 - commencement of injection (specified)
Evaluation: Display group 4, display zone 3 - commencement of injection (actual)
Display group 005
Display group 006 with ignition switched on
Evaluation: Display group 6, display zone 2 - brake pedal monitoring
Evaluation: Display group 6, display zone 3 - cruise control system
Display group 007 with ignition switched on (engine cold and not running)
Evaluation: Display group 7, display zone 1 - fuel temperature
Evaluation: Display group 7, display zone 3 - intake manifold temperature
Evaluation: Display group 7, display zone 4 - coolant temperature
Display group 009
Display group 012
Display group 013 at idling speed (engine warm, coolant temperature not below 80 °C)
Evaluation: Display group 13, display zones 1...4 - idling speed smooth running control
Display group 015
Display group 016 at idling
Evaluation: Display group 16, display zone 2 - additional heater
Evaluation: Display group 16, display zone 3 - actuation of heater elements
Display group 019 at idle speed
Evaluation: Display group 19, display zones 1 and 2 - voltage from modulating piston movement sender (start and stop position st
Display group 000 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
Display group 004 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
Evaluation: Display group 4, display zone 3 - commencement of injection (actual)
Evaluation: Display group 4, display zone 4 - duty cycle of commencement of injection valve
Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
Evaluation: Display group 8, display zone 2 - quantity injected (driver command)
Evaluation: Display group 8, display zone 3 - quantity injected limitation via engine speed (torque limitation)
Evaluation: Display group 8, display zone 4 - quantity injected limitation due to intake air mass (avoidance of smoke)
Display group 010 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
Evaluation: Display group 10, display zone 4 - accelerator position
Display group 011 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
Evaluation: Display group 11, display zone 4 - duty cycle of variable intake manifold flap change-over valve
Fuel preparation system Diesel injection
Ignition system, glow plug system
Diesel direct injection and glow plug system up to 09.99
4-cylinder injection engine (2-valve), mechanics
Heating, ventilation, air conditioning system