Oil replacement
- Make
- Alfa Romeo
- Model
- 145/146 Factory Service Manual
- Year
- 1994–1999
- Section
- Maintenance › Oil replacement
‹ Prev CHECKING OF THE OIL LEVEL OF THE HYDRAULIC TORQUE CONVERTER (Specific for Turbodiesel and T. Spark 16V engines)Next ›
Technical data and maintenanceOil replacement · page 1 of 2
Oil replacement
- Place the car onto the carlift.
- Remove the battery (see GROUP 55).
- Remove the battery basket (see GROUP 55).
- Suck the brakes-clutch fluid from the tank by means of a syringe.
- Remove the protection cap from the drain valve on the cylinder.
- Connect the recovery device (pipe and tank) to the drain valve onto the cylinder.
- Open the drain valve onto the cylinder.
- Press the clutch pedal till to empty the cicuit completely.
- Remove the protection cover from the drain valve on the caliper.
- Connect the recovery device (pipe and tank), to the drain valve on the caliper.
- Open the drain valve onto the caliper
- Press the brake pedal till to discharge the whole fluid.
- Repeat the procedure for the remaining calipers.
‹ Prev CHECKING OF THE OIL LEVEL OF THE HYDRAULIC TORQUE CONVERTER (Specific for Turbodiesel and T. Spark 16V engines)Next ›
Parts & tools for this job For 1994 Alfa Romeo 145/146
- PARTOil filterSearch: Alfa Romeo 145/146 1994 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Alfa Romeo 145/146 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.