L cylinder head - overhaul
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Cylinder head/s › L cylinder head - overhaul
L cylinder head - overhaul
1. Undo the bolts (1a) and remove the power assisted steering pump (1b).
2. Undo bolts (2a) and remove power steering pump mounting (2b).
Follow the same instructions as for the right cylinder head, taking into account that the following are not fitted on the left cylinder head: the bracket on the engine for the reaction rod and the timing belt moving tensioner.
Follow the same instructions as for the right cylinder head, taking into account that the following are not fitted on the left cylinder head: the bracket on the engine for the reaction rod and the timing belt moving tensioner.
1. Place the power assisted steering pump mounting (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | POWER STEERING PUMP SUPPORT/BRACKET | M8 | (Cylinder head side) 2.3 ÷ 2.8 |
2. Place the power assisted steering pump (2a) back in its housing and secure it by tightening the bolts (2b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 2b | Bolt | POWER STEERING PUMP | M8 | (Support side) 2.3 ÷ 2.8 |
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.