Fuel filler pipe housing seal - r r

Operation 1040A37 · Fuel tank and components

1.6 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B11 WHEEL (one) rear - R.R. (Right side).

Proceed with the removal - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

Remove the fuel filler pipe cap.

1. Position a hydraulic jack under the rear suspension crossmember.

2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove the two clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body by the required amount and remove the fuel filler pipe housing seal.

Refitting

Refit the fuel filler pipe seal in its housing.

Refit the fuel filler pipe.

Refit the two clips protecting the fuel filler pipe.

Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

Remove the hydraulic jack from under the rear suspension crossmember.

Tighten the fuel filler pipe retaining bolts.

Replace the fuel filler cap in its housing

Proceed with the refitting - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

Proceed with the refitting - 4450B11 WHEEL (one) rear - R.R. (Right side).

Remove the car from the ramp.

2.0 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B11 WHEEL (one) rear - R.R. (Right side).

Proceed with the removal - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

Remove the fuel filler pipe cap.

1. Position a hydraulic jack under the rear suspension crossmember.

2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove both clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal.

Refitting

Refit the fuel filler pipe housing seal.

Refit the fuel filler pipe.

Refit the two clips protecting the fuel filler pipe.

Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

Remove the hydraulic jack from under the rear suspension crossmember.

Tighten the fuel filler pipe retaining bolts.

Replace the fuel filler cap in its housing

Proceed with the refitting - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

Proceed with the refitting - 4450B11 WHEEL (one) rear - R.R. (Right side).

Remove the car from the ramp.

3.2 V6

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B08 right rear wheel r r.

Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r.

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

Remove the fuel filler pipe cap.

1. Position a hydraulic jack under the rear suspension crossmember.

2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove the two clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal.

Refitting

Refit the fuel filler pipe housing seal.

Refit the fuel filler pipe.

Refit the two clips protecting the fuel filler pipe.

Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

Remove the hydraulic jack from under the rear suspension crossmember.

Tighten the fuel filler pipe retaining bolts.

Replace the fuel filler cap in its housing

Proceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r.

Proceed with refitting - 4450B08 right rear wheel r r.

Remove the car from the ramps.

1.9 JTD 8V

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B11 WHEEL (one) rear - R.R. (Right side).

Proceed with the removal - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

Remove the fuel filler pipe cap.

1. Position a hydraulic jack under the rear suspension crossmember.

2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove the two clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal.

Refitting

Refit the fuel filler pipe housing seal.

Refit the fuel filler pipe.

Refit the two clips protecting the fuel filler pipe.

Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

Remove the hydraulic jack from under the rear suspension crossmember.

Tighten the fuel filler pipe retaining bolts.

Replace the fuel filler cap in its housing

Proceed with the refitting - 7055B43 REAR WHEEL ARCH liner (one), left or right - R.R. (Right side).

Proceed with the refitting - 4450B11 WHEEL (one) rear - R.R. (Right side).

Remove the car from the ramp.

1.9 JTD 16V

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B08 right rear wheel r r.

Proceed with removal - 7055B45 right hand rear supplementary wheel arch - r+r.

Remove the fuel filler pipe cap.

1. Undo the bolts fixing the fuel filler pipe to the bodyshell.

1. Position a hydraulic jack under the rear suspension crossmember.

2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack.

1. Remove the two clips protecting the fuel filler pipe.

1. Disengage the fuel filler pipe from the body as required to remove the fuel filler pipe housing seal.

Refitting

Refit the fuel filler pipe housing seal.

Refit the fuel filler pipe.

Refit the two clips protecting the fuel filler pipe.

Place the rear suspension crossmember back in its housing using the hydraulic jack and fix it tightening the bolts to the recommended torque.

Remove the hydraulic jack from under the rear suspension crossmember.

Tighten the fuel filler pipe retaining bolts.

Replace the fuel filler cap in its housing

Proceed with refitting - 7055B45 right hand rear supplementary wheel arch - r+r.

Proceed with refitting - 4450B08 right rear wheel r r.

Remove the car from the ramps.