Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)22 · Fault diagnosis
22 · Diagnostics

Fuel level gauge not working

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
Instrument panel › Fuel level gauge not working
Fault diagnosisFuel level gauge not working

FUEL LEVEL GAUGE NOT WORKING

With the ignition key in the ON position, the fuel gauge indicator is not working properly (it indicates a different level from what is actually in the tank)

Results of the tests
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect an Examiner to the diagnostic socket

Verify:

  • that there are no faults in the Body Computer
Continue to Step 2Sensor with broken circuit, sensor short circuited, value inconsistent/implausible in relation to actual fuel level.Continue to Step 2
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Keeping the Examiner connected to the diagnostic socket.

Check, by active diagnosis, that the pointer is working

Continue to Step 3The pointer does not movePanel defective, replace the instrument panel Op. 5560B11
3FUEL LEVEL SENSOR CHECKAll OKProblems metOperation
Check the operation of the fuel level sensor.Continue to Step 4Sensor not workingReplace the fuel pump assembly Op. 1040A70
4CHECKING ELECTRICAL CIRCUITAll OKProblems metOperation
Check the continuity/insulation of the cable between the fuel level sensor and the Body Computer: See E4010 INSTRUMENT PANELContinue to Step 5Wires broken/not insulatedRestore cable continuity/insulation: See E4010 INSTRUMENT PANEL
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentBody Computer faulty

Replace the Body Computer Op. 5505A32

Search for the fault starting from another symptom'

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.