Trip meter does not zero
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Instrument panel › Trip meter does not zero
Fault diagnosisTrip meter does not zero
TRIP METER DOES NOT ZERO
With the ignition ON, the milometer cannot be zeroed using the button.
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the Examiner to the diagnostic socket. Verify:
| Continue to Step 2 | Errors present | Continue according to the instructions for the diagnostic equipment | |
| 2 | CHECK ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
Verify:
| Continue to Step 3 | Connections defective, earth defective | Restore the correct connections, if necessary, replace the wiring: See E4010 INSTRUMENT PANEL | |
| 3 | LEFT CONTROL PANEL CHECK | All OK | Problems met | Operation |
| Check that the left control panel is working properly: See E4010 INSTRUMENT PANEL | Continue to Step 4 | Left control panel defective | Replace the left control panel Op. 5560B56 | |
| 4 | CORRECT OPERATION CHECK | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.