Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)13 · Body
13 · Body & interior

Cover (one) on bumpers - r+r

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Mouldings on protections › Cover (one) on bumpers - r+r
BodyCover (one) on bumpers - r+r

Cover (one) on bumpers - r+r

Operation 7055B26 · Exterior protections

Removal

Cover (one) on bumpers - r+r

1 Remove the cover 1a using a thin flat screwdriver inserted in the relevant slot 1b.

NOTE: Take care not to damage the bumper surface.

2 Disengage the retainer from the hole and save the cover.

Refitting

Check that the cover is undamaged.

Fit the retainer in the hole.

Fit the cover in its seating.

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.