D71 Cruise control recall control not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Engine › D71 Cruise control recall control not working
D71 Cruise control recall control not working
After deactivating the Cruise Control system by pressing the brake/clutch pedal, using the 'RESUME' button on the Cruise Control, the speed set previously is not restored.
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | CHECK ON RESUME COMMAND Check that the Cruise Control contacts work properly in the RESUME position | OK | |
| Lack of continuity |
End of diagnosis | ||
| 2 | CHECK CONNECTIONS TO ENGINE MANAGEMENT CONTROL UNIT With the ignition and Cruise Control knob set to 'ON' and 'RESUME', check that there is a voltage signal from the Cruise Control system control to the engine management control unit: Wiring diagram E5060 CRUISE CONTROL | OK | |
| No voltage found |
End of diagnosis | ||
| 3 | CHECK ON CORRECT OPERATION Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| The fault persists: control unit faulty |
Incorrect selection of diagnostic procedure |
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.