D75 Cruise control set control not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Engine › D75 Cruise control set control not working
‹ Prev D74 Cruise control system does not go off when brake pedal pressedNext › E01 Clutch does not release correctly
Fault diagnosisD75 Cruise control set control not working
D75 Cruise control set control not working
The Cruise Control system does not reduce the speed when the ring nut is turned to " - "
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | SELECTOR OPERATION CHECK Check that the Cruise Control contacts work properly in the Set- position: | OK | |
| Lack of continuity |
End of diagnosis | ||
| 2 | SUPPLY CHECK With the ignition ON and the Cruise Control ON and at '-', check that there is a voltage signal from the Cruise Control system to the engine management control unit: Wiring diagram E5060 CRUISE CONTROL | OK | |
| No voltage found |
End of diagnosis | ||
| 3 | CORRECT OPERATION CHECK Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| The fault persists: control unit defective |
Incorrect selection of diagnostic procedure |
‹ Prev D74 Cruise control system does not go off when brake pedal pressedNext › E01 Clutch does not release correctly
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.