K60 Abs failure warning light on
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Instruments › K60 Abs failure warning light on
‹ Prev K54 Code warning light off (initial test not carried out)Next › K90 Instrument lights not working
Fault diagnosisK60 Abs failure warning light on
K60 Abs failure warning light on
Warning light in instrument panel on
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT Connect the diagnostic equipment and check:
| OK | |
| Error detected in the control unit |
End of diagnosis | ||
| Parameter not current |
End of diagnosis | ||
| 2 | ROAD TEST WITH DIAGNOSTIC EQUIPMENT Road test the vehicle at a speed of below 50 km/h, reproducing the conditions in which the fault arises, keeping the diagnostic equipment connected. Verify:
| OK | |
| Error detected in the control unit |
End of diagnosis | ||
| Error detected in the control unit |
End of diagnosis | ||
| 3 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT Carry out active diagnosis of:
| OK | |
| Solenoid valves not working |
End of diagnosis | ||
| Pump motor not working |
End of diagnosis | ||
| 5 | CORRECT OPERATION CHECK Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| Fault persists, control unit defective |
Incorrect selection of diagnostic procedure |
‹ Prev K54 Code warning light off (initial test not carried out)Next › K90 Instrument lights not working
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.