K06 Trip meter fails to reset
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Instruments › K06 Trip meter fails to reset
Fault diagnosisK06 Trip meter fails to reset
K06 Trip meter fails to reset
With the ignition ON, the milometer cannot be zeroed using the button.
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner to the diagnostic socket. Verify:
| OK | |
| Errors present |
End of diagnosis | ||
| 2 | CHECK ELECTRICAL CIRCUIT Verify:
| OK | |
| Connections defective, earth defective |
End of diagnosis | ||
| 3 | LEFT CONTROL PANEL CHECK Check that the left control panel is working properly: Wiring diagram E4010 INSTRUMENT PANEL | OK | |
| Left control panel defective |
End of diagnosis | ||
| 4 | CORRECT OPERATION CHECK Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| Fault persists | Incorrect selection of diagnostic procedure |
Parts & tools for this job For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.