Parking lights not working
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Lights › Parking lights not working
PARKING LIGHTS NOT WORKING
Parking lights do not work under any circumstances.
The parking light activation signal (side and number plate lights) is sent directly from the Body Computer Node.
The parking lights are switched on by the driver using the ignition key and the steering column switch unit. With the key in PARK and the lights switched off, there are two cases:
1. Steering column switch unit in neutral lights up all the side lights, no. plate lights and side lights warning light in the instrument panel
2. Steering column switch unit turned to the left or the right, the left or right side lights, respectively, come on
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that the side lights come on as follows when the light control on the stalk unit is operated:
| End of diagnosis | Side lights do not come on | Continue to Step 1 | |
| 1 | SIDE LIGHTS OPERATION CHECK | All OK | Problems met | Operation |
| Turn the key to the ON position, operate the ring nut on the stalk unit and check that the side lights cone on correctly | Continue to Step 2 | Side lights do not come on | Continue according to the instructions in See table | |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner to the diagnostic socket and check that there are no faults at the Body Computer Node: | Continue to Step 3 | Faults present. | Continue according to the instructions for the diagnostic equipment | |
| 3 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
Check the condition of the connection between the ignition switch and the Body Computer See | Continue to Step 4 | Connections broken | Restore the connections See | |
| 4 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner to the diagnostic socket and check the operation of the bulbs by means of active diagnosis | Continue to Step 5 | No lights come on | Replace the Body Computer Op. | |
| One front light does not come on | Replace the bulb Op. 5540B26 | |||
| One rear light does not come on | Replace the bulb Op. | |||
2.0 JTS 3.2 V6 1.9 JTD 16V Proiettori a scarica di gas | Connect the Examiner to the diagnostic socket and check the operation of the bulbs by means of active diagnosis | Continue to Step 5 | No lights come on | Replace the Body Computer Op. |
| One front light does not come on | Replace the bulb Op. | |||
| One rear light does not come on | Replace the bulb Op. | |||
| 5 | CHECK ON IGNITION SWITCH | All OK | Problems met | Operation |
| Check that the ignition switch is working properly: in particular, the PARK position | Continue to Step 6 | Switch faulty | Replace the ignition switch Op. Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG | |
| 6 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the Body Computer Op. | |
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.