Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Fog lights - functional description

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Interior lighting › Fog lights - functional description
Wiring diagrams and electrical functionsFog lights - functional description

FOG LIGHTS - FUNCTIONAL DESCRIPTION

3.2 V6

Functional description

The fog lights activated signal reaches pin 1 of connector D of

M1

from the control button in the centre panel

H12

The side lights activated signal is sent to pin 28 of connector B of the Body Computer

M1 from the steering column switch unit H5.

The ''ignition ON'' signal (INT) for the switch H1 reaches the underdashboard control unit

B2

at pin 11 of connector H and from there moves on to the Body Computer

M1

(pin 9 of connector F).

The Body Computer

M1 controls the supply for the fog lights by sending an earth signal to the engine compartment control unit B1B from pin 8 of connector A of M1 which energizes the relay T14: this supplies the fog lights F10 (left) and F11 (right).

The circuit is protected by fuse F7 of junction unit

B1A.

A signal is sent, from pin 22 of connector C of

M1

, to light up the LED in the control button

H12

(it is an earth signal which lights up the warning light controlled by the ignition (INT) from the line of fuse F49 of the control unit

B2

).

1.8 T.SPARK, 2.0 JTS, 1.9 JTD 16V

Functional description

The fog lights activated signal reaches pin 1 of connector D of

M1

from the control button in the centre panel

H12

The side lights activated signal is sent to pin 28 of connector B of the Body Computer

M1 from the steering column switch unit H5.

The ''ignition ON'' signal (INT) for the switch H1 reaches the underdashboard control unit

B2

at pin 11 of connector H and from there moves on to the Body Computer

M1

(pin 9 of connector F).

The Body Computer

M1

controls the supply for the fog lights by sending an earth signal to the engine compartment control unit

B1

from pin 8 of connector A of

M1

which energizes the relay T14: this supplies the fog lights

F10

(left) and

F11

(right). The circuit is protected by fuse

F30 of control unit B2.

A signal is sent, from pin 22 of connector C of

M1

, to light up the LED in the control button

H12

(it is an earth signal which lights up the warning light controlled by the ignition (INT) from the line of fuse F49 of the control unit

B2

).

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.