Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Reversing lights - description

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Interior lighting › Reversing lights - description
Wiring diagrams and electrical functionsReversing lights - description

REVERSING LIGHTS - DESCRIPTION

Description

The vehicle is equipped with a reversing light located on the right side of the rear bumper (on right hand drive versions, it is located on the left hand side).

This is operated whenever reverse is engaged via a switch on the outside of the gear housing.

The circuit for the reversing lights is supplied with the key ON (INT) and is protected by a special fuse in the junction unit under the dashboard.

The signal that reverse gear has been engaged is managed by the Body Computer which sends this information, via the CAN, to the integrated radio-telephone-navigator node

See E4091 CONNECT

and to the parking control unit

See E3090 PARKING SENSOR

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.