Cylinder heads (page 2 of 6)
- Make
- Alfa Romeo
- Model
- GTV / Spider GTV and Spider (916) Factory Service Manual
- Year
- 1995–2000
- Section
- Operations in vehicle (V6)
10 Engine – 3.0 V6Cylinder heads · page 2 of 6
- Disconnect the bonnet opening cable from the locks.
- Slacken the fastening screws and remove the cooling fans.
- Disconnect the earth cables from the body.
- Working from under the car remove the power steering pump (see GROUP 41).
- Disconnect the front section of the exhaust pipe from the corresponding manifolds.
- Disconnect the connections of the exhaust gas takeoff pipe for the E.G.R. valve, then remove it.
- Remove the engine stay rod and corresponding support.
Parts & tools for this job For 1995 Alfa Romeo GTV / Spider
- PARTEngine gasket setSearch: Alfa Romeo GTV / Spider 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.