Removing and installing handbrake warning switch

Make

Audi

Model

A1

Section

Brake, brake mechanics › Handbrake › Removing and installing handbrake warning switch

Running gearRemoving and installing handbrake warning switch

Removing and installing handbrake warning switch Removing –  Remove centre console → General body repairs, interior; Rep. gr.68. –  Unclip switch from bracket. –  Detach electrical connector. Installing –  Plug in electrical connector. –  Clip switch into bracket.   Note Ensure correct installation position   Note Make sure that switch works properly before continuing installation. –  Install centre console → General body repairs, interior; Rep. gr.68.

01 Steering & suspension