Privacy Policy
Donate and help keep workshop manuals freely available.
Other Audi Workshop Service and Repair Manuals
Other Makes
Running gear
Body
Power unit
Power transmission
Vehicle electrics
Heating, ventilation, air conditioning system
Auxiliary heater
Air conditioner with refrigerant R134a
Air conditioning
Air conditioner
Safety precautions when working on vehicles fitted with an air conditioner and for handling refrigerant
Warning notices for working on vehicles with a high-voltage system
Notes on general repairs
Servicing refrigerant circuit
Replacing air conditioner compressor pulley
Components for control and regulation of air conditioner not located in passenger compartment
Components not located in passenger compartment (all models)
Components not located in passenger compartment, group of components "1"
Position, actuation and operation of Climatronic coolant shut-off valveN422 and coolant shut-off valve
Removing and installing ambient temperature sensorG17
Components not located in passenger compartment, group of components "2"
Components not located in passenger compartment, group of components "3"
Coolant circulation pumpV50 (coolant pumpV36) on vehicles with a 4-cyl. engine
Coolant circulation pumpV50 (coolant pumpV36) on vehicles with a 6-cyl. petrol engine
Mode of operation of air quality sensorG238 and humidity sender in fresh air intake duct G657
Checking air quality sensorG238 / humidity sender in fresh air intake duct G657
Removing and installing air quality sensorG238 / humidity sender in fresh air intake ductG657
Checking, removing and installing passenger compartment forced air extractor
Removing/installing, checking and cleaning plenum chamber water drain
Checking, removing and installing fresh air intake
Components not located in passenger compartment on vehicles with a high-voltage system
Components of battery cooling module
Removing and installing temperature sensor -G756 upstream of evaporator and -G757 downstream of evaporator for hybrid battery
Removing and installing battery fan 1V457
Removing and installing control motor -V479- for air recirculation flap 1 and -V480- for air recirculation flap 2 for hybrid bat
Moving battery cooling module to service position
Checking, removing and installing battery cooling module condensation drain
Components for control and regulation of air conditioner located in passenger compartment
Components of air conditioning unit and air intake box
Removing and installing heat exchanger of air conditioning unit
Block diagram of air distribution system
Checking cooling output of air conditioner (not for vehicles with a high-voltage system)
Checking cooling output of air conditioner (vehicles with a high-voltage system only)
Checking heat output of air conditioner and actuation of temperature flaps
Detaching refrigerant lines from air conditioner compressor/attaching
Removing and installing air conditioner compressor
Dismantling and assembling air conditioning unit
Capacities