- Running gear
- Body
- Power unit
- Power transmission
- Vehicle electrics
- Heating, ventilation, air conditioning system
- Auxiliary heater
- Air conditioner with refrigerant R134a
- Air conditioning
- Air conditioner
- Safety precautions when working on vehicles fitted with an air conditioner and for handling refrigerant
- Warning notices for working on vehicles with a high-voltage system
- Notes on general repairs
- Servicing refrigerant circuit
- Replacing air conditioner compressor pulley
- Components for control and regulation of air conditioner not located in passenger compartment
- Components not located in passenger compartment (all models)
- Components not located in passenger compartment, group of components "1"
- Position, actuation and operation of Climatronic coolant shut-off valveN422 and coolant shut-off valve
- Removing and installing ambient temperature sensorG17
- Components not located in passenger compartment, group of components "2"
- Components not located in passenger compartment, group of components "3"
- Coolant circulation pumpV50 (coolant pumpV36) on vehicles with a 4-cyl. engine
- Coolant circulation pumpV50 (coolant pumpV36) on vehicles with a 6-cyl. petrol engine
- Mode of operation of air quality sensorG238 and humidity sender in fresh air intake duct G657
- Checking air quality sensorG238 / humidity sender in fresh air intake duct G657
- Removing and installing air quality sensorG238 / humidity sender in fresh air intake ductG657
- Checking, removing and installing passenger compartment forced air extractor
- Removing/installing, checking and cleaning plenum chamber water drain
- Checking, removing and installing fresh air intake
- Components not located in passenger compartment on vehicles with a high-voltage system
- Components of battery cooling module
- Removing and installing temperature sensor -G756 upstream of evaporator and -G757 downstream of evaporator for hybrid battery
- Removing and installing battery fan 1V457
- Removing and installing control motor -V479- for air recirculation flap 1 and -V480- for air recirculation flap 2 for hybrid bat
- Moving battery cooling module to service position
- Checking, removing and installing battery cooling module condensation drain
- Components for control and regulation of air conditioner located in passenger compartment
- Components of air conditioning unit and air intake box
- Removing and installing heat exchanger of air conditioning unit
- Block diagram of air distribution system
- Checking cooling output of air conditioner (not for vehicles with a high-voltage system)
- Checking cooling output of air conditioner (vehicles with a high-voltage system only)
- Checking heat output of air conditioner and actuation of temperature flaps
- Detaching refrigerant lines from air conditioner compressor/attaching
- Removing and installing air conditioner compressor
- Dismantling and assembling air conditioning unit
- Capacities