Check city button
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Body interior fittings and trim › Check city button
CHECK CITY BUTTON
| STEP | CHECK TO BE PERFORMED | REMEDIAL ACTION IF THE CHECK IS NOT OK |
|---|---|---|
| 1 | Check the power supply (+15) Disconnect the wiring from the centre control panel - Connect in ohmmeter mode using the Examiner between pins 7 and 2 of the connector for the centre panel - Press the City button - Check the continuity of the contacts. | Replace the city button |
| 2 | Check the wiring - Check the continuity of the connection between pin 8 of the connector for the wiring side of the City button and pin 20 of connector B for the body computer - Check the continuity of the connection between pin 1 of the wiring side connector and earth | Restore connection continuity. If the checks are regular and the City function does not activate, replace the Body Computer |
City button side connector
Wiring side connector
| Pin | Connector |
|---|---|
| 7 | Earth signal input |
| 2 | Earth signal output for the Body Computer |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.