TUNNEL COVER - R.R

Operation 7040L20 · PASSENGER COMPARTMENT FLOOR COVERING

Removing

- Proceed as follows on the version without armrests:

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040L71 BOX ON TUNNEL REAR COATING - R R

1. Undo the rear bolts securing the tunnel cover.

1. Undo the front bolts securing the tunnel cover.

2. Remove the tunnel cover.

- Proceed as follows on the version with armrests:

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

1. Undo the rear bolts securing the tunnel cover.

1. Undo the front bolts securing the tunnel cover.

2. Remove the tunnel cover.

- Remove the armrest, if necessary.

Op. 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS COMPARTMENT - R.R.

Refitting

- Check that the tunnel cover is not damaged.

- Proceed as follows on the version without armrests:

- Position the tunnel cover and tighten the front and rear bolts.

Op. 7040L71 BOX ON TUNNEL REAR COATING - R R

Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

Op. 7040L37 GEAR LEVER TRIM - R.R

- Proceed as follows on the version with armrests:

Op. 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS COMPARTMENT - R.R.

- Position the tunnel cover and tighten the front and rear bolts.

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.

Op. 7040L37 GEAR LEVER TRIM - R.R