REAR WINDSCREEN - ELIMINATE LEAKS

Operation 7035B04 · REAR WINDSCREEN

Removing

- Remove the internal components covering the rearscreen perimeter at the point where the leak is located.

1. Soak the outside of the penetration area with soapy water.

2. Blow through from the inside using an air jet and identify the leak.

Refitting

- If the leak is small, seal the area involved from the inside; wait the correct amount of time for the sealant to dry and repeat the test.

- If the leak is bigger, remove the rearscreen.

Op. 7035B14 REAR WINDOW GLASS - R.R INCLUDES CLEANING HOUSING

- Refit the removed parts.