WINDSCREEN - ELIMINATE LEAKS

Operation 7035A04 · WINDSCREEN

Removing

- Depending on the location of the penetration, remove the internal and/or external components covering the edge of the windscreen.

1. Bathe the outer area where the penetration has been detected using soapy water.

2. Blow through from the inside using an air jet and identify the penetration point.

Refitting

- If the penetration point is limited in size, seal the area involved from the inside; wait until the sealant has dried and repeat the test.

- If the penetration point is larger, remove the windscreen.

Op. 7035A18 WINDSCREEN GLASS - R.R INCLUDING CLEANING HOUSING

- Refit the removed parts.