BONNET LID OPENING CABLE - R R

Operation 7025A28 · BONNET LID

Removing

Op. 7210A03 R.R. BRACKET CONNECTING FRONT END TO SIDE PANEL/STRUT

Op. 5530B10 BATTERY - R+R

Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.

Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

1. Working on the bonnet lid opening control lever, release the ends (1a) and (1b) of the transmission cale (1c).

1. Disconnect the retainer (1a) for the transmission cable (1b).

2. Fit a sensor to the end (2a) of the transmission cable (1b), then extract the transmission cable (1b), leaving the sensor in its place (to be used for reinserting the cable when refitting).

Refitting

- Check that the control cable is not damaged.

- Use the probe to reinsert the transmission cable in its seat.

- Connect the transmission cable retainer.

- Attach the ends of the transmission cable to the bonnet lid opening control lever.

Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R.

Op. 5530B10 BATTERY - R+R

Op. 7210A03 R.R. BRACKET CONNECTING FRONT END TO SIDE PANEL/STRUT