Workshop Manuals Factory service & repair Fiat
Fiat Bravo Factory Service Manual (2007-2014)12 · Brakes
12 · Brakes

Lateral acceleration and slewing sensor - r.r

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Traction control › Lateral acceleration and slewing sensor - r.r
BrakesLateral acceleration and slewing sensor - r.r

LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Operation 3350E30 · VEHICLE DIRECTION CONTROL SYSTEM VDC/ESP

Removing

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

Op. 7040L20 TUNNEL COVER - R.R

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

work on both sides.

Op. 7040A89 REINFORCEMENT BRACKET BETWEEN DASHBOARD SUPPORTING CROSSMEMER AND BODYSHELL - R.R.

Mark the position of the yaw sensor in relation to the direction of motion shown in the diagram.

1. Disconnect the electrical connection for the yaw sensor.

DescriptionConnector
1Yaw sensor (VDC)See K074 SLEWING SENSOR (VDC)

2. Undo bolts (2a) and remove yaw sensor (2b).

LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Refitting

- Refit the yaw sensor in its housing and tighten the bolts to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Slewing sensorBoltM60.7 ÷ 1.1

The yaw sensor must be fitted in the vehicle’s direction of motion, as shown in the diagram.

LATERAL ACCELERATION AND SLEWING SENSOR - R.R

- Connect the electrical connection for the yaw sensor.

Op. 7040A89 REINFORCEMENT BRACKET BETWEEN DASHBOARD SUPPORTING CROSSMEMER AND BODYSHELL - R.R.

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

work on both sides.

Op. 7040L20 TUNNEL COVER - R.R

Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.

Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.

Op. 7040L37 GEAR LEVER TRIM - R.R

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.