TPMS SYSTEM CONTROL UNIT R R

Operation 4450B91 · WHEELS AND COMPONENTS

Removing

Op. 7040H80 REAR PARCEL SHELF - R.R.

- Remove the right rear side trim without undoing the end of the seat belt, with reference to

Op. 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.

1. Disconnect the electrical connection for the T.P.M.S. control unit.

2. Undo the bolts and remove the T.P.M.S. control unit.

Refitting

- Place the T.P.M.S. control unit in position and tighten the bolts.

- Connect the electrical connection for the T.P.M.S. control unit.

- Place the right rear side trim in position, with reference to

Op. 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.

Op. 7040H80 REAR PARCEL SHELF - R.R.

- Carry out the self-learning produced for the control unit.