Front suspension
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Suspension and wheels › Front suspension
Tightening torquesFront suspension
FRONT SUSPENSION
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Front shock absorber to wheel strut | Bolt (to be replaced) | M10 | 6.7 ÷ 7.3 | 1.4 16v 1.9 JTD 8v |
| Front shock absorber to wheel strut | Bolt (to be replaced) | M12 | 9.5 ÷ 10.5 | 1.9 JTD 16v |
| Front shock absorber to end of travel buffer | Nut (to replace) | M12 | 5.7 ÷ 6.3 | |
| Front shock absorber to bodyshell | Nut | M12 | 3.6 ÷ 4.4 | |
| Front suspension crossmember to bodyshell | Bolt (to be replaced) | M12 | 9.9 ÷ 12.1 | |
| Front suspension crossmember to bodyshell | Bolt (to be replaced) | M14 | 13.5 ÷ 16.5 | |
| Front suspension anti-roll bar joint | Nut (to replace) | M10 | 4.5 ÷ 5.5 | |
| Lower track control arm to front suspension crossmember | Bolt | M12 | 11.5 ÷ 12.5 | |
| Lower track control arm to front suspension crossmember | Bolt | M14 | 17.5 ÷ 19.5 | |
| Lower track control arm to steering knuckle | Bolt | M10 | 6.3 ÷ 7.7 | |
| Anti-roll bar to front suspension crossmember | Bolt | M8 | 2.3 ÷ 2.7 | |
| Reinforcement for front suspension crossmember | Bolt | M10 | 5.9 ÷ 7.1 |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Bravo 2007 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.