Rear suspension
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Suspension and wheels › Rear suspension
Tightening torquesRear suspension
REAR SUSPENSION
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rear shock absorber to bodyshell | Nut | M10 | 2.0 ÷ 3.0 | |
| Rear shock absorber to crossmember | Bolt (to be replaced) | M12 | 10.4 ÷ 11.5 | |
| Flexible bush to axle support | Bolt (to be replaced) | M12 | 12.0 ÷ 13.0 | |
| Rear suspension axle support | Bolt (to be replaced) | M10 | 4.5 ÷ 5.5 |
Parts & tools for this job For 2007 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Bravo 2007 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.