Engine: lubrication - cooling system
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine › Engine: lubrication - cooling system
00 Introduction and technical dataEngine: lubrication - cooling system
Engine: lubrication - cooling system
LUBRICATION
| LUBRICATION | Values in mm |
|---|---|
| Engine lubrication system | forced circulation via lobe gear pump with cartridge filter in series |
| Oil pump | lobe gears |
| Pump operated | through crankshaft |
| Oil pressure relief valve | incorporated in crankshaft front cover |
| between pump casing housing and driven gear | 0,080÷0,186 |
| between the upper side of the gears and the pump cover | 0,025÷0,056 |
| Full flow filter | cartridge |
| Insufficient oil pressure sender unit | electrical |
| Operating pressure at a temperature of 100°C | 3,43÷4,9 bar |
| Oil pressure relief valve spring | P1 6,27÷7,06 daN |
| H1 36 |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.