Lubrication

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Engine › Lubrication

00 Introduction and technical dataLubrication · page 1 of 2

LUBRICATION

	Values in mm
Engine lubrication system	forced feed, via lobe geared pump with cartridge oil filter in series
Oil pump	gears, located in the crankshaft front cover
Pump operated	through chain operated by crankshaft
Oil pressure relief valve	incorporated in crankshaft front cover
Full flow filter	cartridge
Insufficient oil pressure sender unit	electrical
between the edge of the gears and the pump casing	0,110 ÷ 0,180
between the upper edge of the gears and the pump cover	0,016 ÷ 0,086
between the drive gear and the driven gear	0,30
Operating pressure at a temperature of 100°C	idling 1 bar at 4000 rpm 4 bar
Oil pressure relief valve spring	P₁ 11,73 ÷ 12,51
	H₁ 35

01 General