Description (page 3 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine
00 Introduction and technical dataDescription · page 3 of 3
LUBRICATION – Description
| LUBRICATION – Description | Values in mm |
|---|---|
| Engine lubrication system | forced feed via geared pump with cartridge oil filter in seriew |
| Oil pump: type | gears |
| Pump operated | through auxiliary shaft |
| Oil pressure relief valve | incorporated in oil pump |
| Full flow filter | cartridge |
| insufficient oil pressure sender unit | electrical |
| between the edge of the gears and the pump cover | 0,110 ÷ 0,180 |
| between the upper side of the gears and the pump cover | 0,040 ÷ 0,106 |
| Ø₁–Ø₂ | 0,015 ÷ 0,048 |
| Ø₁–Ø₂ | 0,016÷0,048 |
| between the drive gear and the driven gear | 0,30 |
| Operating pressure at a temperature of 100°C | idling > 1 bar at 4000 rpm > 3,7 bar |
| P₁ 6,52 ÷ 6,82 daN | |
| H₁ 22,5 | |
| P₂ 6,92 ÷ 7,21 daN | |
| H₂ 21 |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.